| Item | Unit | LD1327 | |
|---|---|---|---|
| NC System | Standard equipment: GSK980TDi Alternative configuration: FANUC 0i‑TF; SIEMENS 808D; KND K1000Ti | ||
| Max. dia. swing over bed | mm | 800 | |
| Max. dia. swing over cross slide | mm | 480 | |
| Max. length of work‑piece | mm | 1500 | |
| Pipe threading range | mm | Φ70‑275 | |
| Width of bed | mm | 755 | |
| Spindle bore | mm | 280 | |
| Spindle center height | mm | 400 | |
| Power of spindle motor | KW | 15 | |
| Mode of spindle speed | Two gears, smooth adjustment | ||
| Range of spindle speed | r/min | Low gear(L):20‑100 High gear(H):100‑300 | |
| Max.traverse of X/Z | mm | X:420 Z:1250 | |
| X/Z rapid traverse | mm/min | 4000/5000 | |
| Tailstock quill | Diameter | mm | 100 |
| Travel | mm | 250 | |
| Taper | Morse NO.6 | ||
| Turret | Model | HAK21300 | |
| No.of tool stations | Vertical four‑station | ||
| Dimension | mm | 32×32 | |
| Turret indexing time | s | 2.6 | |
| Chuck | K72‑780 four jaw chuck | ||
| Positioning accuracy | mm | 0.020 | |
| Repositioning accuracy | mm | 0.01 | |
| Overall dimensions(L*W*H) | mm | 4900×2200×2300 | |
| Machine weight | T | 11.5 | |
PIPE THREAD LATHE
LD1327 (755 GUIDEWAY)
Technical Parameters
LD1327 on a 755 mm guideway delivers a stiffer bed for continuous oil-pipe threading and heavier cutting loads.
Product Details
Need this machine or a custom equivalent?
REQUEST A QUOTE
