ALLIGATOR SHEAR SERIES
1.weighted fuselage, using double gantry frame, double pressing cylinder, vertical pressing design.
2.Rapid shear operation is achieved with fast hydraulic valve block assembly, 12 cuts per minute.
3.The shearing length can be manually controlled, single and continuous operation can be selected, and diesel engine can be used as power supply.
Tell us the material type, capacity and working conditions. We will recommend a matching model and send a quote.
| Item | Parameter | Value |
|---|---|---|
| Shearing width | 1200mm | |
| Maximum Shearing Force | 4500kn | |
| Cutting Frequency | 12 cuts/min | |
| Electric Motor | Specification | YX3‑225S‑4/37KW |
| Power | 37KW | |
| Rated Speed | 1475r/min | |
| Hydraulic Pump | Specification | G250YCY14‑1B |
| Nominal Displacement | 250 ml/r | |
Due to continuous product improvement, the above‑mentioned technical parameters shall be subject to the actual product. Any changes shall be subject to the final interpretation of our company.
MORE PRODUCTS
ALLIGATOR SHEAR SERIES
ALLIGATOR SHEAR SERIES
ALLIGATOR SHEAR SERIES
ALLIGATOR SHEAR SERIES
